home / News

How to ensure that the inner diameter of the 2mm ball bearings is not deformed during processing?

1,720 Published by Apr 16,2019

The ball bearing is a kind of rolling bearing, and the ball ball is installed between the inner steel ring and the outer steel ring to withstand a large load. It is also called a ball bearing.

Let me give you a machining process. Proceed as follows:
Auxiliary tools and fixtures for 2mm ball bearings: center frame, length of steel with a diameter larger than the outer diameter of the pipe 80---100mm
2, clip the round steel, the head car into an outer diameter equal to the inner diameter of the pipe.
3, the steel pipe is placed on the round steel head of the car, and the workpiece is clamped.

4. The center of the workpiece is mounted on the center frame to correct the center of the workpiece.
5. The inner diameter of the tail end of the steel pipe is matched with the inner and outer cones of 2mm ball bearings.
6, remove the workpiece, and then prepare the other side of the car. ,
7, the lathe chuck on the garden steel exchange - head mounted clamping, then the car into the outer diameter is equal to 2mm ball bearings diameter ruler, the length is slightly longer than 2mm ball bearings thick plus pad
The sum of the thickness, the diameter of the front raft is still the inner diameter of the pipe, and the workpiece can be prepared for another head.

8. When the 2mm ball bearings have been machined, the three claws should be longer and not clamped on the taper.

9, the steps of the car workpiece and the head 2mm ball bearings and the outer taper are the same as above,
Since the inner hole of the workpiece is filled with round steel, the workpiece will not be deformed.
This is a complete 2mm ball bearings machining process, I hope to be useful to you!

If you need 2mm ball bearings or other bearings,please contact me any time!

Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: +8618363031398
Wechat:18363031398

< >

How to install the double row angular contact ball bearing?

Double row angular contact ball bearing installation is more complex than deep groove ball bearin...

Do you like ? 4,790

The cause of micro miniature bearing failure and the solution to overheating of temperature.

Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...

Do you like ? 1,684

Six Mistakes in the Replacement of skate shoes ceramic bearing by Novices

Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...

Do you like ? 1,609

CNC machine bearings common quality problems and main causes.

When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...

Do you like ? 2,221

the performance and feature of stainless steel self-aligning ball bearing

Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...

Do you like ? 1,694

How to choose the suitable longboard skateboard wheels?

The long board has a strong sense of operation and is quick to get started. The longboard is a mu...

Do you like ? 1,587

What’s the design and installation of tapered thrust bearing?

The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...

Do you like ? 1,981

the disassembly, installation and operating environment of tapered needle bearing

Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...

Do you like ? 1,437

company news

latest product

F608ZZ 8*22*7mm flange deep groove ball bearing

11 12.2024

32905 bearing 25*42*12mm tapered roller bearing

11 12.2024

contact us

TEL: +86 183-6303-1398

E-mail: [email protected]

Whatsapp: +8618668909563

Whatsapp: +8618363031398

ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.