How to extend the service life of 4 bolt flange bearing?

4 bolt flange bearing mainly bear radial load, but can also bear radial load and axial load at the same time. However, I don’t know much about the life of flange bearings. Here are 3 measures to extend the life of bearings:
(1) In order to enable the radial gap between the bearing holder and the bearing ring to be set larger than the eccentricity, the internal structure was improved;
(2) Improve the strength of the retainer by optimizing the shape and thickness of the plate;
(3) In order to prevent surface damage caused by the reduction of lubricating oil, a guide groove is designed in the bearing ring.

Precautions for 4 bolt flange bearing installation
For products such as flange linear bearings, the installation work must be optimized to be able to realize the optimized application of the bearing in the optimized installation state. This requires attention to these three key issues when installing the bearings to ensure that the 4 bolt flange bearing installation work is done well.

1. Distinguish the components. Flange linear bearings are composed of multiple components. Especially when installing, multiple components need to be installed together to form the entire system, and the installation position and method of each component are particular. In this case, in order to do the installation work well, it is required to distinguish all the components and not to confuse the components.

2. Clear steps. In order to ensure that the flanged linear bearing achieves the best installation state, it is required that you clarify the specific operation steps before installation, and strictly follow the prescribed steps during the actual installation to avoid operating problems affecting the installation of the bearing Effect.
3. Make sure that the parts are in the correct position. All components of the flange linear bearing must be installed in the required position and condition to achieve a good installation effect. Therefore, it is very important to ensure the correct position of the components if the 4 bolt flange bearing is to be installed.

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563