When assembling axial roller bearing,notice these 4 points!

1.Axial Roller Bearing Chamber Words Selection and Control: Axial Roller Bearing should be rotated flexible and unbaised after pressing the shaft. If there is any obvious rotation, it is not flexible, indicating that the size of the shaft is too large, and the tolerance should be lowered. If the thrust roller bearing is pressed into the shaft, there is a significant "sand" sense by hand, it may be that the shaft is too large or the shaft is not good. Therefore, the roundness is also controlled when controlling the well shaft and the Axial Roller Bearing room.

2, AXIAL ROLLER BEARING assembly method: Because Axial Roller bearing is a high-precision product, if assembled is easy to cause damage to the thrust roller bearing channel, resulting in damage to the thrust roller bearing. Axial roller bearing should have a dedicated mold when assembled, and cannot be hit at will. It can only be stressed when the shaft is pressed, and only a large circle is pulled when the bus is pressed. When assembled, air pressure or hydraulic pressure is required, and the upper and lower molds are maintained in the upper and lower molds during pressing, and if there is an inclination, the bearing channel causes the Axial Roller Bearing to generate a demonstrative.

3, prevention of foreign objects: AXIAL ROLLER Bearing It is easy to enter the inside of the bearing during the balance when loading the balance on the rotor, so it is preferred to be a balanced balance before loading the bearing. Some manufacturers apply some oil or oil lubricating effects in Axial Roller Bearing indoors in the Axial Roller Bearing, but often controls the amount of operators, and rotates more in the bearing if the oil or oil is reached in the bearing room. It is easy to enter the interior of Bearing along the axis. The AXIAL ROLLER Bearing room is preferably not painted or oil, such as non-coating, should be controlled to have a retention in the bearing room.

4, the characteristics of the paint rust: the characteristics of the paint are multi-septral motors, the motor is very good when assembled, but after some time in the warehouse, the motor is very large, and the Axial Roller is removed. Bearing has a serious rust phenomenon. Many manufacturers will think is the problem of Axial Roller Bearing. After our continuous propaganda, the motor plant has realized the problem of mainly insulating paint. This problem is mainly because the acidic substances from the insulating painted, forming corrosive substances under a certain temperature and humidity, and causes the bearing damage to the bearing after corrosion of the AXIAL ROLLER Bearing channel. This problem can only be selected for the choice of insulating paint and is assembled after drying after drying.