How do we keep the using life of bearing forklift?

Bearing forklift is a very important hardware component used in forklifts. Bearing forklift plays an irreplaceable role in the work of forklifts.

bearing forklift lubrication
Bearing forklift lubrication, first open the cover and observe the wear of the release bearing. If it is confirmed that the bearing is not damaged or the wear does not exceed the limit, remove the clutch pedal and adjust the ejector rod to return the release bearing and its seat to the final position. Use a sharp-nosed grease gun to fill the hole of the bearing seat with butter until the bearing overflows with oil, then turn the bearing forklift slightly, fill the oil again, repeat the above work until a little butter overflows around the bearing, and then rotate the bearing to observe the oil If you feel resistance to the bearing rotation, it proves that the bearing has been filled with butter. Then remove a small amount of butter overflowing from all parts of the separation bearing seat, and readjust the position of the separation bearing.

Matters needing attention for bearing forklift:
1. Keep the bearing forklift and its surrounding environment clean
Even if tiny dust invisible to the naked eye enters the forklift bearing, it will increase the wear, vibration and noise of the bearing forklift.
2. Be careful when using and installing a bearing forklift
Strong punching is not allowed, direct hitting of the bearing forklift with a hammer is not allowed, and pressure transmission through the rolling elements is not allowed.
3. Use appropriate and accurate installation toolsTry to use special tools and try to avoid using things like cloth and short fibers.

4.prevent the corrosion of the bearing forklift
When picking up a bearing forklift directly by hand, thoroughly wash off the sweat from your hands and apply high-quality mineral oil before operating. Pay special attention to rust prevention during the rainy season and summer.
However, under certain special operating conditions, a bearing forklift can obtain a longer life than traditional calculations, especially under light load conditions. These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated by a lubricating oil film and limit the surface damage that may be caused by contaminants.

Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp:（86）18363031398
Wechat:18363031368