In order to ensure the high rigidity of the shaft and the bearing on the main shaft of the high-rigidity, ultra-high speed, motor-driven machining center, a preload switching bearing unit is installed. Then, what is a preload switching bearing unit and what is its working principle?
Preload switching bearing unit, as the name suggests, is to apply the most appropriate preload to the bearing. Before, we also shared the knowledge about preload "Why do bearing preload, what are the benefits of bearing preload? ", we know that it is possible to improve the rigidity of the shaft and bearing by preloading, but preloading is like all common sense in daily life, there is a phenomenon of "too much".
Bearing engineers have been thinking for a long time that it would be perfect if the preload can be adjusted in real time according to the operating state of the bearing. Therefore, the preload switching bearing unit was invented, which can operate at any speed. In the specified range, adjust the preload value of the internal bearing. With the support of this bearing unit, the bearing operation system is more reliable and perfect.
As shown in the figure above, the preload switching part located at the rear bearing can adjust the preload amount of the internal angular contact ball bearing by sliding in stages by hydraulic pressure.
At present, preload switching has achieved smooth switching. Due to its high cost, complicated installation and high requirements for engineers, it has not yet become popular, but it is expected that with the advancement of technology and productivity, The preload switching unit will also be gradually simplified and popularized. It is believed that in the near future, it will become a standard component of every group of machine tools.
Welcome to contact me to get the price of bearing unit!
Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563
Double row angular contact ball bearing installation is more complex than deep groove ball bearin...
Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...
Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...
When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...
Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...
The long board has a strong sense of operation and is quick to get started. The longboard is a mu...
The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...
Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...
TEL: +86 183-6303-1398
E-mail: [email protected]
E-mail: [email protected]
Whatsapp: +8618668909563
Whatsapp: +8618363031398
ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.