What is the working principle of your bike bearings?
Bearing bicycles usually refer to the use of industrially-bearing bicycles on all axes of the entire vehicle. Different from bicycles that use a bead structure.
The locations where industrial bearings are used include bowl sets (head tubes), front axles (front hubs), center axles, rear axles (back hubs, tower bases).
The front and rear wheel bike bearings are outer ring rotation, equivalent to double row angular contact ball bike bearings.
The rear wheel bike bearings are mainly subjected to rotating loads; the front wheel bike bearings are mainly subjected to fixed loads.
The bicycle is a chain drive. The pedal drives the front sprocket and transmits it to the rear sprocket. The chain gives the rear wheel a torque to drive the rear wheel to rotate. The rear wheel and the bearing outer ring are fixed together. The steel ball of bike bearings rotates and revolves, and the inner ring is stationary.
The forward force gives the front wheel a torque, the outer ring of the front wheel bike bearings rotate with the front wheel, and the steel ball rotates and revolves and moves forward.
When the bick turning, the front wheel bike bearings are subject to tilting torque on one side.
What is the difference between steel balls and a bearing in the bike shaft?
Bearing features: not easy to bad, do not need too much maintenance, bad direct change;
The characteristics of the steel ball: The division of power is more scientific, but the easy-to-sweep muddy sand requires frequent dismantling of the loose beads for maintenance and maintenance. Otherwise, it will affect the gliding and even cause loose drums and accidents.
If you need any bike bearings or other specifications of bearings,please contact me any time!
Miya
Email/Skype:[email protected]
Mop/Whatsapp:+8618363031398
Wechat:18363031398
Jinan Shenglei Bearing Co., Ltd.
Double row angular contact ball bearing installation is more complex than deep groove ball bearin...
Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...
Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...
When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...
Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...
The long board has a strong sense of operation and is quick to get started. The longboard is a mu...
The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...
Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...
TEL: +86 183-6303-1398
E-mail: [email protected]
E-mail: [email protected]
Whatsapp: +8618668909563
Whatsapp: +8618363031398
ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.