How much do you know about the types of cam follower?

Standard cam follower CF, CR
A cam follower is a bearing with a rod end that incorporates needle rollers in the outer ring. It is designed for outer ring rotation with a low coefficient of friction and excellent rotational performance. In order to effectively increase the load field, the radial clearance of this bearing is designed to be smaller than that of ordinary needle roller bearings. Therefore, the shock load can be reduced, and a stable long life can be obtained. Rod ends are threaded or graded for easy installation. Cam follower bearings have high rigidity and high precision as cam follower bearings for cam mechanisms and linear motion, and are widely used in machine tools, industrial robots, electronic components, and office automation equipment. The stainless steel cam followers has excellent corrosion resistance and is suitable for use in places where grease is not suitable, environments where water splashes, and clean rooms.

Standard cam follower CF
This is the basic model of the cam followers. Rod end diameters range from a minimum of 3mm to a maximum of 30mm, with a wide range of sizes and a wide range of uses.

Cam followers with Thrust Washers
The sliding contact parts between the two shoulders of the outer ring, the rod end head and the side plate are equipped with thrust washers made of special synthetic resin with excellent wear resistance and heat resistance, which can withstand the occurrence of installation errors. Axial load on the outer ring prevents wear and friction of the sliding surface.

Inch cam followers
This is an inch series cam follower bearing. There are CR and CRH. CRH is treated with black oxide film.

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563