How to remove the ceiling fan bearing?

The general models of ceiling fan bearing are 6202 and 6203.

When using a ceiling fan, do not throw anything under the ceiling fan, and do not jump under the ceiling fan. Check the ceiling fan suspension for reliability before each use.

The method to eliminate the sound of the small ceiling fan: check whether the motor bearing is worn, if the bearing is worn, replace the new bearing, and if there is a lack of oil, add high temperature-resistant lubricating grease.

How to remove the ceiling fan bearing?
Press hard on the central round iron in a circle, hold the rotor, and hit it while turning to separate it. See the bottom bearing, if the bearing is not damaged, lift the cover of the bearing and put some high temperature snow oil.

Ceiling fans are very common objects in our daily life. It can cool down our hot summer days. Then, as our daily utensils, ceiling fans also need to be cleaned, installed and disassembled.

First remove the fan blade, then remove the fastening screw next to the fixed fan blade with a screwdriver, tear off a circle of decorative strips, the joints of the upper and lower casings of the motor can be seen, lift the shaft, and tap the machine with a wooden strip. Around the lower part of the head, then slowly pry it open from the gap in the middle with a flat-blade screwdriver, and take off the upper shell. If it is to add lubricating grease, it must be filled with high-temperature-resistant grease, and cannot be replaced with ordinary butter, otherwise the heat generated by the ceiling fan will melt the butter and throw it out when the ceiling fan bearing is working.

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563