How to install and remove the collar bearing?

Do not allow the collar bearing to move in the direction of the hole. This positioning method is simple in structure, takes up less space, and is easy to disassemble and assemble. It is generally used in structures where the axial force of the bearing is small, so that the circlip will not be crushed and the bearing will run out.

There are two types of disassembly of the circlip. One is the open type and the other is the shrink type.
According to the shape or installation position of the circlip, select a suitable tool to remove or install the circlip.

Parts such as circlips can be damaged if an inappropriate tool is selected or excessive force is applied.

Circlip classification of collar bearing
Shaft card (STW) and hole card (RTW) are more commonly used, and the domestic mainland mainly produces 65MN spring steel.

circlip shape
The circlip is C type E type U type.

​​
Remove the retaining ring.
Circlip pliers: special tools for removing and assembling circlips.
There are two types of circlip pliers: bore and shaft. When the circlip is taken out or installed, under normal circumstances, use special tools to open the hole and use circlip pliers; under normal circumstances, use circlip pliers to close the jaws of the shaft.

Type of snap ring pliers.
There are several tools that can be used to remove and install snap rings. Some tools have replaceable tips. Choose the most suitable tool according to the snap ring.

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563