What’s the use environment and installation method of cup tapered roller bearing?

cup tapered roller bearing environment:

According to the location of use, the conditions of use and environmental conditions, the choice of size, accuracy, and the appropriate bearing is the prerequisite for bearing life and reliability.

1. Location: cup tapered roller bearing are suitable for bearing radial and axial combined loads with radial loads. They are usually paired with two sets of bearings. They are mainly used in front and rear hubs of automobiles, active bevel gears, and differential speeds. Transmission parts such as reducer and reducer.

2. Allowable speed: In the environment with correct installation and good lubrication, it is allowed to be 0.3-0.5 times of the limit speed of the bearing. Under normal circumstances, it is best to use 0.2 times the limit speed.

3. Allowable tilt angle: cup tapered roller bearing generally do not allow the shaft to tilt relative to the housing bore. If tilted, the maximum does not exceed 2 degrees.

4, allowable temperature: under normal load, and the lubricant has high temperature resistance, and the lubrication is sufficient, the general bearing is allowed to work at -30 ° C - 150 ° C ambient temperature.

Fourth, the installation of cup tapered roller bearing

1. Installation method of thrust tapered roller bearing

Thrust cylindrical roller bearings and thrust needle roller bearings are suitable for low speed applications. Thrust tapered roller bearings Speed ​​flat thrust bearings are mainly subjected to axial loads in the assembly and are widely used. Although the thrust bearing is installed and operated.

2. How is the gear and cup tapered roller bearing assembled?

When the gear is designed, there must be an axial positioning step, the outer ring of the bearing is dead, and the outer ring of the inner ring is locked with a lock nut, and the locking pre-tightening force is set according to the application condition.

3. How to install and adjust the clearance of cup tapered roller bearing?

Tapered roller bearings are generally used, face to face and back to back. The clearance size should be determined according to the size of the bearing you choose and the transmission accuracy required by the mechanism. As for the adjustment method, it can be achieved by pressing back.

ZYSL company specializes in cup tapered roller bearing for many years. All raw materials and accessories have been carefully selected to ensure a good user experience.

Welcome to contact me to know the price of cup tapered roller bearing!