home / News

How to adjust the eccentric cam bearing?

2,830 Published by Mar 27,2020

1. Make the center line of the mounting hole at right angles to the movement direction of the eccentric cam bearing, and then align it with a nut to fix it. Do not directly hit the flange of the eccentric cam bearing with a hammer during installation, otherwise it will cause poor rotation or fracture.

2. The mark on the side of the rod end flange indicates the position of the oil hole on the track surface. When installing, pay attention not to install the oil hole in the load area. The presence of oil holes in the load domain shortens the life of the eccentric cam bearing. A vertical hole in the center of the rod end is used for refueling or stopping.

3. When tightening the nut, do not exceed the maximum tightening torque range shown in the dimension table. Excessive tightening torque may break the thread at the rod end. In addition, if it is used under some working conditions that may loosen the nut, please use a lock nut, spring washer or special lock nut.

Hex hole eccentric cam bearing refueling method:

4. The eccentric cam bearing of the eccentric rod end and the eccentric cam bearing with an eccentric sleeve are marked on the side of the flange of the rod end as shown in the figure below. They are roughly used as the reference position for adjustment.

The position of the outer ring can be adjusted by rotating the screwdriver notch or hexagonal hole on the head of the rod end. The rod end can be tightened with a nut using a spring washer. When tightening the nut, do not exceed the maximum tightening torque range shown in the dimension table.

When carrying an impact load, and it is necessary to maintain the eccentricity adjustment amount correctly, it is recommended to use a method of opening the rod end or the eccentric shaft sleeve through the bearing seat and fixing it with a positioning pin. However, rod ends with a diameter of less than 8mm (eccentric sleeve diameter 11mm) are quenched and hardened.

5. Make the length of the mounting hole of the eccentric cam bearing (CFE) with an eccentric bushing longer than 0.5 mm in the dimension table B (eccentric bushing)

Welcome to contact me to get the price for eccentric cam bearing!

Contact: Miya

Email: [email protected]

Skype: [email protected]

MP/Whatsapp: +8618363031398

Wechat:18363031398

< >

How to install the double row angular contact ball bearing?

Double row angular contact ball bearing installation is more complex than deep groove ball bearin...

Do you like ? 4,790

The cause of micro miniature bearing failure and the solution to overheating of temperature.

Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...

Do you like ? 1,684

Six Mistakes in the Replacement of skate shoes ceramic bearing by Novices

Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...

Do you like ? 1,609

CNC machine bearings common quality problems and main causes.

When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...

Do you like ? 2,221

the performance and feature of stainless steel self-aligning ball bearing

Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...

Do you like ? 1,694

How to choose the suitable longboard skateboard wheels?

The long board has a strong sense of operation and is quick to get started. The longboard is a mu...

Do you like ? 1,587

What’s the design and installation of tapered thrust bearing?

The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...

Do you like ? 1,981

the disassembly, installation and operating environment of tapered needle bearing

Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...

Do you like ? 1,437

company news

latest product

6309 zz bearing 45*100*25mm deep groove ball bearing

11 04.2024

HK2538 bearing 25*32*38mm needle roller bearing

11 04.2024

contact us

TEL: +86 183-6303-1398

E-mail: [email protected]

Whatsapp: +8618668909563

Whatsapp: +8618363031398

ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.