1. In the absence or inability to use the press, the female rod end bearings can be mounted with the assembly sleeve and the hammer. The hammering force should be transmitted evenly over the entire circumference of the end face of the female rod end bearing ferrule, so that the hammered end face of the assembly casing should be made spherical.
2. The force required to install the female rod end bearings is related to the size of the joint bearing and the amount of interference. For medium or large joint bearings with large interference, the method is hot. Before the hot loading, put the female rod end bearings or the separable joint bearing ring into the fuel tank or special heater and heat evenly to 80-100 °C, not more than 100 °C.
3, hot loaded female rod end bearings requires skilled operation skills. When the joint bearing is removed from the heating tank or heater, immediately wipe off the oil traces and attachments on the surface of the female rod end bearing with a clean cloth (note that the cotton yarn cannot be used), and then place it in front of the mating surface in one operation. Push the joint bearing to the place where it stands against the shoulder. Always tighten during the cooling process or tap the joint bearing with a small hammer through the fitting sleeve to make it tight. When installing female rod end bearings, rotate the joint bearing slightly to avoid tipping or jamming.
4. When the outer ring of the female rod end bearings and the housing hole are tightly fitted, the housing can be heated and then loaded into the joint bearing. In particular, the joint bearing of light metal material may damage the mating surface due to the pressing of the outer ring during the tight fitting process. In this case, the female rod end bearings should be heated first.
If you are finding female rod end bearings or other bearings, please contact me any time!
Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: +8618363031398
Wechat:18363031398
Double row angular contact ball bearing installation is more complex than deep groove ball bearin...
Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...
Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...
When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...
Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...
The long board has a strong sense of operation and is quick to get started. The longboard is a mu...
The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...
Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...
TEL: +86 183-6303-1398
E-mail: [email protected]
E-mail: [email protected]
Whatsapp: +8618668909563
Whatsapp: +8618363031398
ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.