What is the introduction and usage of fishing reel bearings?

1. Introduction of fishing reel bearings device

(1) Main body: also known as the casing, which refers to the main body except the winding groove and the rocker arm, usually made of composite material, nylon glass fiber material, aluminum alloy material, zinc alloy material, titanium alloy and magnesium alloy material . The main body made of composite materials and nylon glass fiber has high strength, good stability and strong impact resistance, but it lacks rigidity. There are two main aspects of fishing reels made of magnesium-titanium alloy. The first is the consideration of the weight of the fishing reel bearings during manufacturing, and the second is the consideration of quality.

(B), rocker handle: also known as rocker assembly, its main function is to make the fishing reel bearings gain power, take up or pay off by the angler's rotation. Taking into account the different hand habits of each person, the general rocker arm can be interchanged left and right. For those who are used to using the left hand, as long as the knob of the rocker arm is removed, the rocker arm can be changed to the left hand position, and vice versa.

(C), the adjustment of the relief device: referred to as the adjustment button, is a safety device. When the struggling force of the big fish hook is too large and exceeds the originally planned force, the fishing reel will automatically reverse the pay-off, so that the rod hook line will not be injured. Anglers use tightening or loosening methods to set the size of the draining force and increase the success rate of walking the fish.

(Four), check button: also known as check switch, its main function is to control the reversal of the fishing reel bearings. When the check button is in the check position, turn the rocker arm, the fishing reel can only rotate forward, not reverse, and the fishing reel only has the function of taking up the line. When the backstop button is pulled to the relaxed position, the fishing reel can rotate forward and reverse, and can take up and unwind the line.

(5) Main gear: It is also called plane gear and large gear. It is connected with the handle to drive, and the wire is wound in a fixed and not forwarded, but telescopic winding groove.

(6) Fishing reel bearings: The main wire can be wound evenly in the winding groove. It is the main part of the transmission in the fishing reel and is located on the spindle handle and the main gear rod. It has the function of overcoming the transmission resistance and ensuring that the fishing reel rotates smoothly under the condition that the take-up is blocked, and overcome the noise of mechanical friction during transmission.

(7). Thread stop: It is located at the top of the reel slot. Its main function is to gather the thrown fishing line at the position of the throwing nut. Reduce the friction of the fishing line and reduce the resistance when closing the line.

(8) Caster: also known as wheel clamp, it is located at the lowermost end of the main body of the fishing reel bearings. The main function is to fix the fishing reel bearings on the caster seat (card holder) of the throwing rod.

2. Types of fishing reel bearings and methods of use

(1) Features of spinning reels of spinning models: when throwing and retrieving, the take-up and take-up reel is fast. The drain device of the fishing reel is located in front of the reel groove of the fishing reel bearings, which is convenient for anglers according to the size of fish and the bearing of the fishing line Ability to adjust the relief device, improve the endurance of the rod and hook line, so that the fishing group can get greater protection and improve the success rate. The disadvantage is that when the operation is not used properly, it is easy to have a line explosion (the fish line suddenly bursts into a mess).

(2) Drum-shaped fishing reel bearings: abbreviated as drum-shaped wheel. It is usually composed of wire winding grooves, anti-rotation bar cradle arms, side plates, casters, counterweights and other components. It is mainly used to assemble large and medium-sized throwing rods for boat fishing and beach fishing in mid-depth sea areas. The specifications are complete, there are large, medium and small models, and the wheel body is equipped with three control switches such as open, half stop and stop.

(3) Enclosed fishing reel bearings: It is composed of cradle arm rotation stop key, crank handle reel cover, outlet hole and other components. The spinning groove of the spinning wheel reel is open, and the pay-off and take-up can be seen, thrown away and fast. If used improperly, there will be messy lines. The winding slot of the closed fishing reel is sealed, and the pay-off and take-up are invisible. This avoids broken lines and chaotic lines.

(4) Drum-type single fishing reel bearings: It is composed of side plates, anti-rotation rods, wire winding grooves, rocker arms, counterweights, casters and other components. The winding groove is shaped like a drum, with a larger diameter than the spinning reel of the spinning model, and the take-up speed is fast. It is similar to the lure fishing (fly fishing) flywheel. There is a switch under the bearing, with three knobs for stop, half stop and open, which has better performance. The volume of the coil groove is large, and the line can be installed 200 meters. It is characterized by simple structure and convenient use. The disadvantages are large volume, large weight, short throwing distance, and high technical requirements for throwing.

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563