The front wheel bearing is the front wheel of the car, so how to judge that the front wheel bearing is broken? If the front wheel bearings are badly damaged, the car will make a buzzing noise when driving, but the noise will be loud, but it sounds different from the tire noise. You can try to drive the car for half an hour. After getting off the car, gently touch the part of the hub where you think the bearing is damaged. If the bearing is damaged, it will generate high heat and it is estimated that it will be hot.
If you feel that it is higher than the normal temperature, change it decisively. And if the damage is very serious, the heat generated will be faster, which will damage the axle and the end cover. This must not be sloppy and procrastinating, and you need to replace it immediately, just go to the auto parts city to find a repair department for replacement. Because relatively speaking, the 4S store will be very expensive, and it is not so necessary.
The price of car front wheel bearing is different according to different models. Generally, the price of replacing a bearing of a car in a repair shop is about 200. Consult the repair shop for specific price suggestions.
Should the front wheel bearing break down?
If it is determined that the bearing is damaged, it is recommended to go to the repair shop for replacement immediately. Because once the front wheel bearing is damaged, if it is not replaced in time, it will cause greater damage. The damaged steel ball or support frame will increase the more serious wear in the bearing, which will not only cause abnormal noise when the car is running, and the tire is worn. , Decreased controllability, and even the bearing gap will increase to lose balance, causing the steering wheel to float and cause traffic accidents.
Welcome to contact me to get the price of front wheel bearing!
Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563
Double row angular contact ball bearing installation is more complex than deep groove ball bearin...
Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...
Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...
When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...
Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...
The long board has a strong sense of operation and is quick to get started. The longboard is a mu...
The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...
Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...
TEL: +86 183-6303-1398
E-mail: [email protected]
E-mail: [email protected]
Whatsapp: +8618668909563
Whatsapp: +8618363031398
ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.