What do you know about ge spherical bearing?

Maintenance-free ge spherical bearing
Maintenance-free ge spherical bearing are used when there are special requirements for operating life, or the metal sliding contact surface of the bearing is not suitable for lubrication, such as under unidirectional load. Spherical sliding bearings allow space adjustment and movement, and depending on the bearing type (radial, angular contact or axial spherical sliding bearings), it can support radial, mixed or axial loads.

ge spherical bearing requiring maintenance
Because it is a sliding surface of steel/steel or steel/copper, INA ge spherical bearing that require maintenance must be lubricated. Lubrication can reduce friction, reduce wear, increase service life and prevent corrosion. When designing an imported bearing arrangement, it is necessary to ensure that there is sufficient grease on the ge spherical bearingposition. Provide radial, angular contact and axial bearings.

Maintenance-free rod end bearings
The maintenance-free rod end includes a housing with a complete threaded shank and a maintenance-free ge spherical bearing. The housing with a complete threaded shank has external or internal threads. The spherical sliding bearing is firmly fixed in the housing. After the rod end is galvanized, corrosion can be avoided.

The rod end supports radial loads in the direction of extension or compression. It is suitable for slow motion with small to moderate rotation angle, unidirectional load and in some cases changing load (in the case of GE..-UK-2RS, it is also suitable for changing load). The sealed rod end has lip seals on both sides, so as to play the role of anti-fouling and waterproof.

Rod end bearings requiring maintenance
Rod end bearings include a bearing seat with the entire rod and self-aligning ge spherical bearing that require maintenance. The bearing seat with the entire rod has an external or internal thread. The self-aligning sliding bearing is firmly positioned on the bearing seat. The rod end bearing is corrosion-resistant by galvanized coating. Rod end bearings can support radial forces in tensile or compressive directions, transmit motion and pressure at low levels of movement, and are suitable for alternating loads and under certain conditions for unilateral loads. The thin-walled design of the bearing housing allows compact adjacent structures. The sealed rod end bearing prevents contamination and sprays water through a lip seal.

Hydraulic rod end bearings
The hydraulic rod end is assembled with the ge spherical bearing GE..-LO or GE..-DO. Both have a steel/steel sliding contact surface, which can support the radial force in the direction of extension or compression, and can transmit Movement and low torque, suitable for changing radial load. The rod end can be locked by the threaded shank or welded firmly by the round or square welding surface.

The rod end of the circular welding surface has a 45º welding angle and a centering option relying on concentric positioning pins. They are especially suitable for piston rods. The hydraulic rod end with a square welding surface is especially suitable for cylinder seats. For diameters above 50mm, the rod end has a single groove on the threaded shank; when the diameter is 50mm, there is a double groove on the threaded shank, and it can be relubricated through a tapered lubrication nozzle.

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563