How to maintain a linear flange bearing?

Linear flange bearing can be divided into: round flange type, method flange type, oval flange type, guided round flange type, guided method blue type, guided oval flange type, and elongated round flange type.
linear flange bearing (the end or the middle has a mounting flange, which can be installed with screws. The flanges are generally divided into three types: round, square and trimmed)

Maintenance of metal linear flange bearing:
Lubrication and friction: Inject anti-corrosion oil into the linear flange bearing. If grease is used for lubrication, first use kerosene or organic solvent to remove the anti-corrosion oil, and then add grease after air drying. (It is recommended to use lithium soap grease with viscosity marked No.2.)
If oil lubrication is used, it is not necessary to remove the anti-corrosion oil. According to the temperature change, the lubricating oil of ISO viscosity grade VG15-100 can be selected. The shaft lubrication can be oiled from the oil supply pipe or from the oil hole on the outer bearing seat. Since the sealing ring will scrape off the lubricating oil, oil lubrication is not suitable for non-porous bearings with sealing rings.

Disposal of linear flange bearing
(1) The disassembly of each part of the linear flange bearing may cause foreign matter to enter or adversely affect the assembly accuracy of each part. Please do not disassemble it.
(2) Please note that the linear bushing may be damaged if dropped or knocked. When the product is impacted, even if the appearance is not damaged, the function can still be
It may be damaged, please pay attention.

Lubrication of linear flange bearing
(1) Please wipe the anti-rust oil carefully and seal it with lubricant before use.
(2) Please avoid mixing lubricants with different properties.

Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: (86)18363031398
Wechat:18363031368