search
banner

Answers to some difficult questions when installing the linear guideway

2,152 Published by Nov 26,2019

linear guideway are commonly used in life. How much do we know about this product? Maybe you feel at a loss, there are many questions. The following editors summarize some of the difficult problems of linear guideway for you, let me answer them for you, and let us know together.

linear slide rail bearings

How to choose grease for linear guideway?
You must know that the lubrication has a great impact on the life of the linear guideway. Here we should say that the principle of selecting the lubrication finger has basic oils and additives. If the types and brands are different, then their grease performance is The difference is very large, the allowable rotation limit is also different. When we choose, we must also pay attention to it, and the performance of the grease, they are determined by the basic type. In general, the viscosity is only suitable for low temperature High speed. If it is high viscosity, it is suitable for high temperature and high load. Thickeners also have a serious impact on the lubricating performance, which determines its water resistance. Different brands of grease cannot be mixed, otherwise it will have an adverse effect on it.

high quality linear rail bearing block

Should the linear guideway be cleaned before installation?
On its surface, there will be anti-rust oil. We should use clean gasoline and kerosene for washing, plus high-quality lubricating grease, they can be installed and used. The degree of cleanliness has a great impact on the life of the linear guide, as well as vibration and noise, but to remind friends, the fully enclosed linear guide should not be cleaned and refueled.linear guide block

How to safety and disassembly of linear guideway?
Don't hammer directly on the end face and non-stressed surface during installation to ensure uniform force during installation. It will be smoother if you apply lubricant during installation. When you experience difficulty in disassembling, you can use the disassembly tool to pull outward while spraying hot oil above the inner ring.

Welcome to contact me to get the price of linear guideway!

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563

 

How to install the double row angular contact ball bearing?

Double row angular contact ball bearing installation is more complex than deep groove ball bearin...

Do you like ? 4,790

Read more

The cause of micro miniature bearing failure and the solution to overheating of temperature.

Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...

Do you like ? 1,684

Read more

Six Mistakes in the Replacement of skate shoes ceramic bearing by Novices

Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...

Do you like ? 1,609

Read more

CNC machine bearings common quality problems and main causes.

When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...

Do you like ? 2,221

Read more

the performance and feature of stainless steel self-aligning ball bearing

Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...

Do you like ? 1,694

Read more

How to choose the suitable longboard skateboard wheels?

The long board has a strong sense of operation and is quick to get started. The longboard is a mu...

Do you like ? 1,587

Read more

What’s the design and installation of tapered thrust bearing?

The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...

Do you like ? 1,981

Read more

the disassembly, installation and operating environment of tapered needle bearing

Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...

Do you like ? 1,437

Read more