Linear rails and slides, also known as line rails, slide rails, linear guides, and linear slides, are used for linear reciprocating applications and can withstand a certain amount of torque to achieve high-precision linear motion under high load conditions. Linear guides are called in the mainland. Taiwan is generally called linear guides and linear slides.
Linear rails and slides are divided into square ball linear guides, double-axis core roller linear guides, and single-axis linear guides.
Linear rails and slides are precision parts and require considerable care when used. Even with high-performance linear guides, if used improperly, the expected performance will not be achieved and the linear rails and slides will be easily damaged.
Therefore, the following matters should be noted when using linear guides:
Prevent corrosion
When taking the linear rails and slides directly, it is necessary to wash off the sweat on the hands and apply high-quality mineral oil before handling. In the rainy season and summer, pay special attention to rust prevention.
Keep the environment clean
Keeping the linear rails and slides and their surroundings clean Even if tiny dust that is invisible to the naked eye enters the rails, it increases the wear, vibration and noise of the rails.
Installation should be careful
The linear rails and slides should be carefully and carefully used during installation. Strong stamping is not allowed. It is not allowed to hit the rail directly with a hammer. It is not allowed to transmit pressure through the rolling elements.
The installation tool should be suitable
Linear rails and slides use special tools with the right and most accurate installation tools, and try to avoid the use of cloth and staple fibers.
ZYSL company specializes in thk linear ball slide for many years. All raw materials and accessories have been carefully selected to ensure a good user experience.
Welcome to contact us!
Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: +8618363031398
Wechat:18363031398
Double row angular contact ball bearing installation is more complex than deep groove ball bearin...
Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...
Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...
When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...
Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...
The long board has a strong sense of operation and is quick to get started. The longboard is a mu...
The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...
Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...
TEL: +86 183-6303-1398
E-mail: [email protected]
E-mail: [email protected]
Whatsapp: +8618668909563
Whatsapp: +8618363031398
ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.