Miniature rod end bearings are sensitive to damage from miniature rod end bearings. For example, spalling, indentation, corrosion, cracks, abrasion, etc. are reflected in the vibration measurement of the miniature rod end bearings. Therefore, by using special miniature rod end bearings The measurer (frequency analyzer, etc.) can measure the magnitude of the vibration, and the specific case of the abnormality cannot be inferred by the frequency division. The measured value differs depending on the use conditions of the miniature rod end bearings or the position at which the sensor is mounted. Therefore, it is necessary to analyze and compare the measured values of each machine in advance to determine the judgment standard.
The temperature of the miniature rod end bearings, generally the temperature of the outdoor rod end bearings, can be inferred. If the oil hole can directly measure the temperature of the outer rod end bearings, it is more suitable. Typically, the temperature of the miniature rod end bearings begins to rise as the miniature rod end bearings begin to run, reaching a steady state after 1-2 hours. The normal temperature of the miniature rod end bearings varies with the heat capacity, heat dissipation, speed and load of the machine. If the lubrication and installation parts are suitable, the temperature of the miniature rod end bearings will rise sharply, and abnormal high temperature will occur. At this time, it is necessary to stop the operation and take necessary precautions. The thermal sensor can be used to monitor the operating temperature of the miniature rod end bearings at any time, and automatically alarm or stop the occurrence of the burning shaft accident when the temperature exceeds the specified value.
If you need the miniature rod end bearings or other bearings, please contact me any time!
Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: +8618363031398
Wechat:18363031398
Double row angular contact ball bearing installation is more complex than deep groove ball bearin...
Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...
Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...
When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...
Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...
The long board has a strong sense of operation and is quick to get started. The longboard is a mu...
The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...
Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...
TEL: +86 183-6303-1398
E-mail: [email protected]
E-mail: [email protected]
Whatsapp: +8618668909563
Whatsapp: +8618363031398
ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.