home / ZYSL bearing / ZYSL full ceramic bearings 1212 full ceramic self aligning bearing 1212

To be the top bearing manufacturers in world is our goal,ZYSL bearing Co., Ltd is the first choice of your bearing manufacturers list!

ZYSL full ceramic bearings 1212 full ceramic self aligning bearing 1212

ZYSL full ceramic bearings 1212 full ceramic self aligning bearing ball 1212 is a bearing with full Si3N4 ceramic materials.It is high speed ans low noise,Self-lubricating without grease.Sizes are:60*110*22.self aligning bearings ball are constructed with the inner ring and ball assembly contained within an outer ring that has a spherical Self-aligning ball bearing has two rows of balls. There is a common spherical raceway whose center of curvature accords with the bearing center. Even though the inner race, the steel balls and the holder incline relative to the outer race, the bearing can rotate. So the bearing is self-aligning, and will not be affected by shaft misalignment relative to the bearing box. The self-aligning ball bearing is mainly subject to radial load. It can also be subject to a minimum of axial load, but it usually cannot be subject to pure axial load.

Product Specification:

Model NO.:1212
Inner diameter:60mm
Outer diameter:110mm
Thickness:22mm
Type:full ceramic self aligning ball bearing
Brand:ZYSL

Inquiry Now

May you like

silicon nitride ceramic bearing

Product Details

ZYSL full ceramic bearings 1212 full ceramic self aligning bearing 1212

The related models of ZYSL full ceramic bearings 1212

Bearing No.		Boundary Dimensions(mm)			Approx. Mass(kg)
Cylindrical Bore	Tapered Bore	d	D	B	Approx. Mass(kg)
1201	1201k	12	32	10	0.039
1202	1202k	15	35	11	0.048
1203	1203k	17	40	12	0.072
1204	1204k	20	47	14	0.120
1205	1205k	25	52	15	0.140
1206	1206k	30	62	16	0.220
1207	1207k	35	72	17	0.230
1208	1208k	40	80	18	0.415
1209	1209k	45	85	19	0.465
1210	1210k	50	90	20	0.525
1211	1211k	55	100	21	0.705
1212	1212k	60	110	22	0.900
1213	1213k	65	120	23	1.150
1214	1214k	70	125	24	1.300
1215	1215k	75	130	25	1.410
1216	1216k	80	140	26	1.730
1217	1217k	85	150	28	2.090
1218	1218k	90	160	30	2.550
1304	1304k	20	52	15	0.165
1305	1305k	25	62	17	0.255
1306	1306k	30	72	19	0.358
1307	1307k	35	80	21	0.510
1308	1308k	40	90	23	0.715

full ceramic bearings

ZYSL full ceramic bearings 1212 introduction:

Ceramic bearings have the characteristics of anti-magnetic insulation, abrasion resistant,oil-free self-lubricating and enduring extreme high or low temperature, so they can be used for harsh environment and even under some special condition. The material of rings and rollers is jar gonia(ZrO2) and the holder uses poly back fluoride(PTFE) as standard configuration. Generally, we can use the reinforced nylon made of glass fiber 66(GRPA66-25), special engineering plastics (PEEK, PI), nonrust steel(AISI SUS316 SUS304), brass(Cu) and so on. Ceramic deep groove ball bearings are made entirely of ceramic material and are superior to common Steel Angular Contact Bearings in many ways. Ceramic is the perfect material for any application seeking to achieve higher RPM's, reduce overall weight or for extremely harsh environments where high temperatures and corrosive substances are present.

The advantages of ZYSL full ceramic bearings 1212:

1) The ceramic bearing has the feature of corrosion resistance, the ceramic rolling bearing suitable for operation under harsh conditions covered corrosion media.

2) Since the ceramic ball rolling has lower density than steel, so which is much lighter, so when you rotate the outer ring centrifugal effect can be reduced by 40% , thus greatly extended service life.

3) The expansion and contraction of the ceramic affected smaller than steel, and therefore the gap of the bearing is constant, the bearing allows the temperature changes more severe environment.

4) As the ceramic has higher modulus of elasticity than steel, when the force is not easy deformation, and therefore help to improve the operating speed and achieve high accuracy.

Applications of ZYSL full ceramic bearings 1212:

1) Power Tools

2) Fans

3) Washing Machines

4) Pumps

5) Electric Motors

6) Sport Apparaus

7) Textile Machined

8) Skateboard Skate

We can produce all specifications of ceramic bearings for you!

bearing certificates

FAQ:
1. How long is your delivery term?
Our standard product delivery term is normally 30 days. A new product development cycle is 60 days in normal. Under normal circumstances, there are standing stock for regular types. You can email us to learn more details.
2. Where is your port of shipment located?
Our main port of shipment is Guangzhou port, and we may operate at other ports if required by the customer.
3. I couldn’t find a design to fit my application in your catalog. Can you help me design a bearing?
Yes, technical expertise is available to assist you with engineering design for custom products. Available options include, but are not limited to, custom rings, retainers, balls, shields, lubricants, and packaging. We look forward to working with you to satisfy your rotary motion requirements.

If you need any brands or any specifications of bearings, please contact me!
Contact:Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: +8618363031398
Wechat:18363031398

write us

Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.