Three ways to identify radial bearing housing faults!

Radial bearing housing are precision parts of mechanical equipment. How to increase productivity in factories, first of all, the performance of mechanical equipment must be the best, and one of the biggest relationships with the performance of mechanical equipment-bearings. Therefore, the factory must conduct a good inspection of the radial bearing housing in the machinery and equipment during production and processing. For the sake of safety, sharing the three major identification methods of radial bearing housing failures, I hope it will be helpful to everyone.

1. Recognition by voice

Recognition by voice requires extensive experience. It must be fully trained to be able to distinguish between radial bearing housing sounds and non-bearing sounds. For this reason, a dedicated person should be used to carry out this work as far as possible. You can clearly hear the sound of the bearing with a listening device or a listening stick attached to the shell.

2. Identify by working temperature

This method is a comparative identification method and is limited to occasions where the operating state is not changed. For this reason, the temperature must be continuously recorded. When a fault occurs, the temperature will not only increase, but also irregular changes. It is appropriate to use this method together with the voice recognition method.

3. Identify by the state of the lubricant

The lubricant is sampled and analyzed to determine whether it is mixed with foreign matter or metal powder based on its degree of contamination. This method is especially effective for bearings that cannot be observed close or large bearings.

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563