Do you know the features and uses of sealed angular contact ball bearings?

sealed angular contact ball bearings can withstand both axial and radial forces in one direction. The line between the two points above and below the stress point of the rolling body. And radial direction has a certain Angle, such bearings for sealed angular contact ball bearings.
(1)What kind of bearings are sealed angular contact ball bearings belongs to ball bearing in rolling bearing
(2) since sealed angular contact ball bearings can bear both radial force and certain axial force, its installation mode is usually in pairs.Back to back, face to face.

(3) sealed angular contact ball bearings there are two types of integral, and can be separated, in the installation, generally have to give a certain axial force, to eliminate the bearing clearance, therefore, the bearing generally do not give clearance.

Features and uses of sealed angular contact ball bearings:
sealed angular contact ball bearings has a high limit speed, which can bear both radial and axial loads, as well as pure axial loads.

The axial load capacity is determined by the contact Angle and increases with the increase of the contact angle. Single row sealed angular contact ball bearings can only withstand Axial load in one direction, when bearing radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, the bearing is generally used in pairs.
Double row sealed angular contact ball bearings can bear larger radial and axial combined loads and torque loads· it can make the axial displacement of the axis or shell in both directions, and the contact Angle is 30 degrees. Pair-mounted sealed angular contact ball bearings can bear combined radial and axial loads, which are mainly radial loads, or pure radial loads.The series configuration can only withstand axial loads in a single direction, while the other two configurations can withstand axial loads in either direction.

Generally, this type of bearing is selected and combined by the manufacturer and submitted to the user in pairs. After installation, the bearing is preloaded to surplus, and the ring and the steel ball are in the axial preloading state, thus improving the stiffness and rotation accuracy of the whole group of bearings as a single support.

ZYSL company specializes in sealed angular contact ball bearings for many years. All raw materials and accessories have been carefully selected to ensure a good user experience.

Welcome to contact us!