search
banner

The single row angular contact ball bearings structural forms.

1,722 Published by Jan 22,2019

The single row angular contact ball bearings are coded S70000, and the outer ring raceway has no locking edge and can be separated from the inner ring, the cage and the ball assembly, so that it can be installed separately. Most of these miniature bearings with an inner diameter of less than 10 mm are used in devices with high requirements for dynamic balance, noise, vibration and stability, such as gyro rotors and micromotors.

single row angular contact ball bearings factory
The ferrule channel of this type of single row angular contact ball bearings has a locking port, so the two rings cannot be separated. According to the contact angle, there are three types:
1 single row angular contact ball bearings with contact angle α=40°, suitable for withstanding large axial loads;
2 single row angular contact ball bearings with contact angle α=25°, mostly used for precision spindle bearings;
3 Single row angular contact ball bearings with contact angle α=15°, mostly used for larger size precision bearings.
single row angular contact ball bearings manufacturer
Single row angular contact ball bearings in pairs are designed to withstand both radial and axial loads, as well as pure radial loads and axial loads in either direction. The single row angular contact ball bearings are selected by the manufacturer according to a certain preload requirement, and are provided in pairs for use by the user. When the bearing is mounted on the machine, the clearance in the bearing is completely eliminated, and the ferrule and the ball are pre-tensioned, thereby improving the rigidity of the combined bearing.

single row angular contact ball bearings producer
The single row angular contact ball bearings in pairs are available in three different configurations:
1 Back-to-back configuration, the rear code is DB (such as 70000/DB), this configuration is better in steel, and it has good performance under the overturning moment, and the bearing can bear the bidirectional axial load;
2 face-to-face configuration, the rear code is DF (such as 70,000 / DF), the rigidity of this configuration and the ability to withstand the overturning moment is not as good as the DB configuration, single row angular contact ball bearings can withstand two-way axial load;
3 series configuration, rear coded DT (such as 70000/DT), this configuration can also be connected in series with three or more single row angular contact ball bearings, but can only bear axial load in one direction. Usually, in order to balance and limit the axial displacement of the shaft, the other bearing needs to be fitted with a bearing that can bear the axial load in the other direction.

single row angular contact ball bearings supplier
In addition, there is a single row angular contact ball bearings that can be paired. The single row angular contact ball bearings are specially processed and can be combined in any combination of two back-to-back, two face-to-face or two series. The axial clearance of the paired combination can be selected according to requirements. The rear code CA indicates that the axial clearance is small. , CB indicates that the axial clearance is moderate, and CC indicates that the axial clearance is large.
The universal matched bearing can also be configured as a bearing with pre-interference according to the requirements of use, and will be indicated by the codes GA, GB and GC. GA indicates a small pre-interference after pairing; GB indicates a medium pre-interference after pairing; GC indicates a larger pre-interference after pairing.

If you need the single row angular contact ball bearings or other bearings, please contact me any time!

Contact: Miya
Email: [email protected]
Skype: [email protected]

MP/Whatsapp: +8618363031398
Wechat:18363031398

How to install the double row angular contact ball bearing?

Double row angular contact ball bearing installation is more complex than deep groove ball bearin...

Do you like ? 4,790

Read more

The cause of micro miniature bearing failure and the solution to overheating of temperature.

Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...

Do you like ? 1,684

Read more

Six Mistakes in the Replacement of skate shoes ceramic bearing by Novices

Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...

Do you like ? 1,609

Read more

CNC machine bearings common quality problems and main causes.

When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...

Do you like ? 2,221

Read more

the performance and feature of stainless steel self-aligning ball bearing

Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...

Do you like ? 1,694

Read more

How to choose the suitable longboard skateboard wheels?

The long board has a strong sense of operation and is quick to get started. The longboard is a mu...

Do you like ? 1,587

Read more

What’s the design and installation of tapered thrust bearing?

The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...

Do you like ? 1,981

Read more

the disassembly, installation and operating environment of tapered needle bearing

Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...

Do you like ? 1,437

Read more