The needle roller and cage assembly is commonly known as the K-type needle roller bearing. In the old days, it was called a chicken cage bearing because of its shape resembling a chicken cage. The K-type needle roller bearing is a bearing consisting only of a cage and a needle roller. It is widely used in the environment where the shaft and the bearing housing can be used as a raceway. Since this type of bearing has no bearing inner ring and outer ring, it is suitable for small and narrow. The use of needle roller and cage assemblies is a wise choice for radial structural space and the ability to withstand high loads and high stiffness, combined with high rotational accuracy and easy installation and low production costs. .
split cage needle roller bearing
Material: GCr15 bearing steel
Processing: grinding through a grinding machine
Heat treatment: quenching HRc60-64
Special instructions: needle roller diameter tolerance is 2μm, accuracy class is G2 level grouping
A cage partially encloses all or part of the rolling elements, and the bearing parts that move therewith, to isolate the rolling elements, and usually also guide the rolling elements and retain them in the bearings. When the shaft and bearing housing can be used as a raceway surface, it can be used as a set of independent bearing components. The needle roller bearing has a small cross section but high load capacity, so it is very suitable for bearing arrangements with limited radial space. Needle bearing has a relatively high section height and high load carrying capacity. The general-purpose needle-shaped retaining type bearing is a bearing which has excellent performance under high rotation. The needle-shaped roller is guided by a special shape with high rigidity and precision, and the dimensional error is extremely low. They have considerable lubricant capacity, light weight and high rigidity, allowing them to be used under severe conditions: high speed, impact load, etc., so they are used in a wide range of applications. Generally used in gearboxes such as automobiles, tractors, construction machinery, etc.
Main function of split cage needle roller bearing:
the rolling bodies are equally spaced, evenly distributed on the circumference of the raceway to prevent the rolling bodies from colliding and rubbing during work; guiding and driving the rolling elements to roll on the correct raceway; in the separate bearings, The rolling element is combined with a ferrule to prevent the rolling elements from falling off.
The cage has a variety of structural types and complex shapes. Many equidistant pockets on the cage, sometimes referred to as rolling windows, are used to isolate and guide the rolling elements. The pockets are spherical, circular, elliptical, rectangular and toothed, and their dimensions are larger than the size of the rolling elements. The difference between the two is the pocket gap. The pocket gap has a certain amount of motion in the radial and axial directions. The total radial activity is called the gap of the cage. The portion of the connection between the roller cage windows is referred to as the lintel, which acts to connect and increase the strength of the cage.
Structural features of split cage needle roller bearing
K/KS single row / single row split
KK/KKS double row / double row split
KZK connecting rod crank pin
KBK connecting rod piston pin
KNL long cylindrical roller and retaining assembly
The radial needle roller and cage assemblies are available in single row K and double row K...ZW versions, and special split needle and cage assemblies can be used when the integral cage cannot be installed. Add "D" to the model.
If you need split cage needle roller bearing or other bearings, please contact me any time!
Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563
Double row angular contact ball bearing installation is more complex than deep groove ball bearin...
Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...
Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...
When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...
Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...
The long board has a strong sense of operation and is quick to get started. The longboard is a mu...
The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...
Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...
TEL: +86 183-6303-1398
E-mail: [email protected]
E-mail: [email protected]
Whatsapp: +8618668909563
Whatsapp: +8618363031398
ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.