Precautions when using the steel flange mounted bearings

Precautions when using the bearing:

First, the use of matters needing attention:
Rolling bearings make precision parts, so they need to be cautious when using them. They use high-performance bearings. If they are not used properly, they can not achieve the expected performance. Therefore, the following items should be used when using steel flange mounted bearings:

 1. Keep the steel flange mounted bearings and their surroundings clean. Even if the smiling dust that is invisible to the naked eye enters the bearing, it will increase the wear, vibration, and noise of the bearing.
 2, use the installation carefully, do not allow strong stamping, do not allow the hammer to directly hit the bearing, not allowed to pass the rolling body to transfer pressure.
 3, use appropriate and accurate installation tools, try to use special tools, try to avoid the use of cloth and short fibers and the like.
 4, to prevent the corrosion of the bearing, directly take the bearing by hand, to wash the sweat on the hand, and apply high-quality mineral oil before the operation, especially in the rainy season and summer to pay attention to rust.

Second, the steel flange mounted bearings cooperation:
  1, the choice of cooperation:
The inner and outer diameters of the rolling bearing are manufactured to standard tolerances. The tightness of the inner ring of the bearing to the shaft and the outer ring to the seat hole can only be achieved by controlling the tolerance of the journal and the tolerance of the seat hole. The inner ring of the bearing and the shaft are made of a base hole, and the outer ring of the bearing and the seat hole are made by a shaft. The correct choice of fit, you must know the actual load conditions of the steel flange mounted bearings, operating temperature, and other requirements, but in fact, it is very difficult. Therefore, most of the cases are based on the use of lint selection.
  2, the load size of steel flange mounted bearings
The amount of over-win between the ferrule and the shaft or casing depends on the size of the load, the heavier load uses a larger over-win, and the lighter load uses a smaller over-win.

If you want to buy steel flange mounted bearings or other ball & roller bearings, if you are interested in our bearings, please contact me, we will do the best for you!

Contact: Ellen
Email: [email protected]
Skype: +8618668909563
MP/Whatsapp: +8618668909563
Wechat:18668909563