home / News

How to install tracker bearing correctly?

3,588 Published by Dec 15,2021

1. After making the center line of the mounting hole and the moving direction of the tracker bearing at right angles, the side of the mounting hole should be aligned correctly according to the / size in the size table and then fixed with a nut. When installing, please do not directly hit the flange of the tracker bearing with a hammer, otherwise it will cause poor rotation or breakage.

2. The mark on the side of the rod end flange indicates the oil hole position on the track surface S. When installing, be careful not to install the oil hole in the load area. Oil holes located in the load domain will shorten the service life of the tracker bearing. The vertical hole in the center of the rod end is used for refueling or stopping.

3. Tightening the nut of tracker bearing should not exceed the maximum tightening torque range shown in the dimension table. Excessive tightening torque may sometimes cause the threaded part of the rod end to break. In addition, if it is used under some working conditions that may loosen the nut, use a lock nut, spring washer or special lock nut, etc.

4. Eccentric tracker bearing and cam follower with eccentric bushing. The position S of the outer ring of the bearing can be adjusted by rotating it with the screwdriver on the top of the rod end or the hexagonal hole. The rod end can be fastened with a spring washer, etc. with a screw nut. When tightening the nut, the maximum tightening torque range shown in the dimension table should not be exceeded.

When bearing an impact load and need to correctly maintain the eccentric adjustment, it is recommended to drill the rod or eccentric shaft sleeve through the shaft hole and fix it with a positioning pin. However, rod ends with a rod end diameter of less than 8mm (eccentric bushing diameter 11mm) are quenched and hardened.

Welcome to contact me to get the price of tracker bearing.

Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: (86)18363031398
Wechat:18363031368

< >

How to install the double row angular contact ball bearing?

Double row angular contact ball bearing installation is more complex than deep groove ball bearin...

Do you like ? 4,790

The cause of micro miniature bearing failure and the solution to overheating of temperature.

Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...

Do you like ? 1,684

Six Mistakes in the Replacement of skate shoes ceramic bearing by Novices

Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...

Do you like ? 1,609

CNC machine bearings common quality problems and main causes.

When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...

Do you like ? 2,221

the performance and feature of stainless steel self-aligning ball bearing

Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...

Do you like ? 1,694

How to choose the suitable longboard skateboard wheels?

The long board has a strong sense of operation and is quick to get started. The longboard is a mu...

Do you like ? 1,587

What’s the design and installation of tapered thrust bearing?

The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...

Do you like ? 1,981

the disassembly, installation and operating environment of tapered needle bearing

Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...

Do you like ? 1,437

company news

latest product

40TM18U40AL Deep Groove Ball Bearing 40x80x16mm

12 23.2024

silicon nitride ceramic ball bearings 20*52*12 mm hybrid ceramic bearing

12 23.2024

contact us

TEL: +86 183-6303-1398

E-mail: [email protected]

Whatsapp: +8618668909563

Whatsapp: +8618363031398

ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.