home / News

How to keep the service life of the truck bearing?

2,298 Published by Apr 28,2020

DF single row tapered roller bearing type 30,000 is used on truck axles.
This kind of truck bearing can know enough to limit the axial displacement of the shaft or the housing in one direction and bear the axial load in one direction. The additional axial force will be generated under the action of radial load. Therefore, the outer ring of the truck bearing and the inner ring of the inner ring of the same name are relatively installed in the middle of the two bearings of the shaft. If used alone, the external force of the shaft must be greater than Additional axial force.

The 313 series tapered roller truck bearing has a large contact angle (27 ° to -30 °) and can withstand large axial loads. The contact angle of other series bearings is between 10 ° -18 °.
Pay attention to the main points of the installation and maintenance of truck bearings. From the perspective of use, pay attention to the following points to ensure that the bearings can work reliably: 1. Improve the quality of lubrication, control the pressure, temperature and flow of oil, and strengthen oil filtration. 2. Use fuel and lubricating oil that comply with regulations.

3. Control the temperature state of the diesel generator set, and work under supercooling and overheating conditions is unfavorable. In cold weather, the diesel engine should be preheated before starting, and the crankshaft should be turned by hand to allow the engine oil to enter the friction surface. 4. The surface quality and geometry of truck bearing and journal should be strictly ensured. 5. The bearing clearance should be appropriate. If the generator set is too large, it will cause impact. If it is too small, it will be poorly lubricated and may burn the tiles.

How to ensure that the truck bearing works reliably, generally speaking, the following points should be noted from the perspective of use: 1. The clearance of the truck bearing should be appropriate. If it is too large, it will cause impact; if it is too small, it will be poorly lubricated and may burn tiles; 2. The surface quality and geometry of truck bearing and journal should be strictly ensured; 3. Improve the quality of lubrication, control the pressure, temperature and flow of engine oil, strengthen the filtration of engine oil;
4. Use fuel and lubricating oil that comply with regulations. In order to make the truck bearing fully play and maintain its proper performance for a long time, it is necessary to do regular maintenance (regular inspection). Through appropriate regular inspections, early detection of failures and prevention of accidents are very important to improve productivity and economy.

Welcome to contact me to get the price of drive shaft carrier bearing!

Contact: Miya
Email: [email protected]
Skype: [email protected]
MP/Whatsapp: +8618363031398
Wechat:18363031398

< >

How to install the double row angular contact ball bearing?

Double row angular contact ball bearing installation is more complex than deep groove ball bearin...

Do you like ? 4,790

The cause of micro miniature bearing failure and the solution to overheating of temperature.

Failure reason of micro miniature bearing About 40% of the failure of micro miniature bearings i...

Do you like ? 1,684

Six Mistakes in the Replacement of skate shoes ceramic bearing by Novices

Novice Mistakes 1: Do not consider the characteristics of your own actions, blindly choose Althou...

Do you like ? 1,609

CNC machine bearings common quality problems and main causes.

When assembling cnc machine bearings, the Venus machine tool must be preloaded, so that the origi...

Do you like ? 2,221

the performance and feature of stainless steel self-aligning ball bearing

Performance characteristics of stainless steel self-aligning ball bearing Self-aligning ball bear...

Do you like ? 1,694

How to choose the suitable longboard skateboard wheels?

The long board has a strong sense of operation and is quick to get started. The longboard is a mu...

Do you like ? 1,587

What’s the design and installation of tapered thrust bearing?

The tapered thrust bearing with cage is a split design so that the two washers as well as the rol...

Do you like ? 1,981

the disassembly, installation and operating environment of tapered needle bearing

Disassembly of the tapered needle bearing: When the bearing is to be used continuously after it i...

Do you like ? 1,437

company news

latest product

40TM18U40AL Deep Groove Ball Bearing 40x80x16mm

12 23.2024

silicon nitride ceramic ball bearings 20*52*12 mm hybrid ceramic bearing

12 23.2024

contact us

TEL: +86 183-6303-1398

E-mail: [email protected]

Whatsapp: +8618668909563

Whatsapp: +8618363031398

ADD: Room E3-1203, Mingquanchunxiao, Dikou Road, Tianqiao District, Jinan City Shandong Province, China.